MEX Water Dispensers

Hot and cold one press away

Coffee means waiting on the kettle, a cold drink means digging in the fridge. A dispenser has both waiting already. Hold a glass up and press

Start With These Three

MEX ME607-UF black and stainless water dispenser with UF filtration
New · direct connect with UF filtration
MEX Hot & Cold Water Dispenser ME607-UF
ME607-UF · UF filtration down to 0.01 micron · Plumbed in, no bottle needed · Three taps: hot, cold and room temperature · Black and stainless
19,900.-
View this model →
MEX ME607-B bottom loading water dispenser with three piano-key taps
Newest arrival · bottom loading, three temperatures
MEX Hot & Cold Water Dispenser ME607-B, Bottom Loading
ME607-B · Bottom loading, no lifting the bottle overhead · Three piano-key taps: hot, cold and room temperature · R600A refrigerant · Stainless Design · Price excludes the bottle
9,900.- 13,900.-
View this model →
MEX ME602-T top loading water dispenser with three piano-key taps
Top loading, three temperatures · 17 litre storage
MEX Hot & Cold Water Dispenser ME602-T, Top Loading
ME602-T · Top loading · Three piano-key taps: hot, cold and room temperature · R600A refrigerant · 17 litre storage compartment · Price excludes the bottle
6,790.- 9,900.-
View this model →
0.01micron
The filtration rating stated for the ME607-UF
On the ME607-UF only
Filtration

Built-in filtration, on the plumbed-in model only

Most dispensers in this range run on a bottle. You lift the bottle on and draw from it, so there is no filtration inside the unit. The ME607-UF works differently. It is plumbed straight into the water line and the water passes through a UF system rated at 0.01 micron before it is dispensed. Its specification sheet states that it filters sediment, odour, colour, chlorine, chemicals and microorganisms. It still serves three temperatures like the top and bottom loading models, hot, cold and room temperature, and it is certified to TIS 2461-2565 by TISI.

UF system, 0.01 micronPlumbed inNo bottle neededThree taps, three temperaturesTIS 2461-2565

Do not write that every model in the range has filtration. The catalogue states no filtration for any bottle-fed model. The UF detail comes from the ME607-UF specification sheet alone.

R600A non-CFC on the ME607-UF
R600A non-CFC on the ME607-B and ME602-T
The other three use R134A non-CFC
Stated model by model
R600A

The refrigerant is stated model by model

Refrigerant is a specification most people never check when buying, but it is stated plainly for each model. The ME607-UF, ME607-B and ME602-T use R600A non-CFC. The ME314-T, ME509-T and ME530-B use R134A non-CFC. Both are non-CFC types. The cooling system brings cold water down to 10 °C or below, drawing 85 W on the bottle-fed models and 100 W on the ME607-UF.

R600A on ME607-UF, ME607-B, ME602-TR134A on the other threeAll non-CFCCold water to 10 °C

Do not write that every model uses R600A. The documents state R600A for these three models only, and claim no environmental or energy benefit, so do not add one.

Black and stainless body on the ME607-UF
Stainless Design badge on the ME607-B
304 stainless water tank on the ME314-T
Stainless hot tank on the hot-water models
Stated model by model
Stainless Steel

Where the stainless actually is, model by model

In this kind of product "stainless" can mean the outer surface or the tank inside, and those are not the same claim, so the documents state it per model. The ME607-UF is listed in black and stainless and uses a high-quality stainless steel hot tank. The ME607-B carries a Stainless Design badge. The ME314-T is stated to have a grade 304 stainless water tank. The ME509-T, ME602-T and ME530-B are stated to have a high-quality stainless hot tank, with no grade given.

Black and stainless on the ME607-UFStainless Design on the ME607-B304 tank on the ME314-TStainless hot tank on hot models

Do not write that grade 304 stainless is used throughout. It is stated for the ME314-T water tank only. Do not write that the whole outer body is stainless. No document states that for any model.

All products

Every type, every budget – take your pick

Filter :

Frequently asked questions

Top loading or bottom loading, what is the difference
It comes down to where the bottle sits. Top loaders take the bottle inverted on top of the unit, which makes swapping it simple and costs less. There are three: ME314-T · ME509-T · ME602-T, at THB 5,690 to 6,790.-. Bottom loaders hold the bottle inside the cabinet, so you never lift it overhead, and they look tidier because the bottle is out of sight. There are two: ME530-B · ME607-B, at THB 8,900 and 9,900.-. Both bottom loaders also have a warning light for when the bottle runs dry, which the top loaders do not list.
Why does ME314-T cost the same as ME509-T with no hot water
Because they are different things. ME314-T pours ambient and cold water only, with no hot tap. Its selling point is the slim body, the narrowest here at 24.7 cm wide, and it is the only model the catalogue states has a 304 stainless, rust-free water tank, with push-to-pour taps. ME509-T costs the same but adds 420 W hot water, the two-layer safety system, a child lock and a 13 litre cabinet. If your household makes coffee or warms milk, look at ME509-T. If space matters more and you never need hot water, ME314-T fits better.
The price excludes the bottle, so what else do I need
Every model here has a line printed under the price stating the sale price does not include the water bottle. You get the unit only, and the bottled water comes from your own supplier or a local delivery service. There is no plumbing to do, since these run on a bottle: plug it in and it works. The catalogue does not state which bottle sizes fit, or how much clearance to leave from the wall, so ask a dealer or a service centre first, on 02-493-6565.
How long is the warranty, and can I order ME602-T now
Every model here states a one year product warranty and a five year compressor warranty. ME602-T carries a Coming Soon badge in the catalogue, meaning it was not yet on sale when the book went to print, so check availability with sales. ME607-B carries a NEW ARRIVAL badge and is the newest model in the range. If something goes wrong, do not open the unit yourself. MEX has service centres nationwide on 02-493-6565.

Tell us where it goes and who lifts the bottle
MEX takes it from there

Five MEX water dispensers, top loading and bottom loading, with a one year product warranty and five years on the compressor. Service centres nationwide, call 02-493-6565

MEX SWITCH ON THE GOOD TIMES

แชทเพื่อสั่งซื้อสินค้า

แชทเพื่อสั่งซื้อสินค้า

แชทเพื่อสั่งซื้อสินค้า

แชทเพื่อสั่งซื้อสินค้า

Shopping cart0
There are no products in the cart!
0
Special Price
SAVE