Undermount Sinks - MEX เครื่องใช้ไฟฟ้าภายในบ้าน


			
				
				
					


  
  
    MEX Undermount Sinks
    
      One slab, unbroken
      One sink, no rim
    
    
    
    You paid for the whole slab, so show the whole slab. Nothing crossing it, nothing catching the eye. The kitchen reads as one piece
    
      Find Your Size
      See How Flush It Sits
    
  
  
				
				
				
		
				
		
				
				
					


  
    
    Featured Models
  
  
    
      
        
          
            
            
          
          UNDERMOUNT · TWO BOWLSTwo-Bowl Undermount Sink, 86 cm
BSQ822 · AISI 304 stainless, 1.0 mm · bowls 45×40 and 34×40 cm, 20 cm deep · cut-out 82.5×40.5 cm · tap shown not included
8,500 11,600
Explore This Model →
        
        
          
            
            
          
          UNDERMOUNT · WIDEST SINGLE BOWL IN THE SERIESSingle-Bowl Undermount Sink, 81 cm
BSQ77 · one 70×40 cm bowl, 20 cm deep · AISI 304 stainless, 1.0 mm · cut-out 77×40 cm · tap shown not included
7,500 10,500
Explore This Model →
        
        
          
            
            
          
          UNDERMOUNT · SMALLEST IN THE SERIESSingle-Bowl Undermount Sink, 44 cm
BSQ40 · a 40×40 cm cut-out is all it needs · full 20 cm bowl depth · AISI 304 stainless, 1.0 mm · tap shown not included
4,500 6,400
Explore This Model →
        
      
    
    
    
    
  
  

				
				
				
		
				
				
					


  
    
      3.5 inch
The Big Basket waste supplied with every BSQ sink
      A food-waste basket built in
    
    
      WASTE & TRAP
      Food scraps stop at the bowl instead of collecting in the pipe
      A blocked pipe and a smell coming back up the drain share one cause: the scraps that got past the waste. Every sink in the BSQ series therefore ships with a 3.5-inch Big Basket waste, which has a food-waste basket built into it, 73 mm across and 40 mm deep, that lifts out to empty and drops back in. A waste pipe and trap are included with every model too: the two-bowl BSQ822 takes the P32PP, the single-bowl models the P31PP.
      
      3.5-inch Big Basket wasteBasket 73 mm across, 40 mm deepTrap included on every modelBig Basket in AISI 304 stainless
      On this series the odour seal is in the supplied trap, not in the waste fitting itself. If you want the seal built into the fitting, that is the 4-inch MN or 4.5-inch ML waste, which belongs to a different group of sinks. The Big Basket waste is also sold separately, in stainless steel and in Grey Metal.
    
  
  

				
				
				
		
				
				
					


  
    
      R5 rounded corners, all four
Still a crisp square shape for a modern kitchen
A sponge reaches the bottom of the corner in one pass
      R5 rounded corners
    
    
      R5 CORNER
      Rounded corners, so the cloth reaches everywhere
      A square bowl gives you more usable space than a curved one, but it brings sharp corners with it, and a sharp corner is where the grime settles and the sponge cannot reach. The BSQ series therefore gives the bowl R5 rounded corners: round enough that a sponge sweeps right into the bottom of the corner in one pass, while the bowl keeps its crisp square shape for a modern kitchen.
      
      R5 rounded cornersA crisp, modern square bowlNo corner for grime to settle inAcross the BSQ series
      Cut-out sizes differ from model to model, so check the figure for the model you choose on its product page before the worktop is cut. An undermount sink should be fitted by an experienced installer, since it has to be held up underneath the worktop.
    
  
  

				
				
				
		
				
				
					


  All products
  Every size, every budget – take your pick

				
				
				
		
					
				
				
					Filter :
AllBowls
Brand
Colour
Function
Grade
Material
Sink Width

          

          

                
				
				
					
				
		
				
				
					


  
    Frequently asked questions
    How do I know which size to get
Start by measuring the inside width of the cabinet the sink will sit in, then compare it with the furniture cutout size printed on every product page. This category runs from 32x38 cm up to 82.5x40.5 cm. The rule is simple: the cutout has to be narrower than the inside of the cabinet, and enough stone has to be left for your fabricator to clamp the sink and build the support frame under the worktop. The catalogue does not set that clearance, so let your fabricator decide it. Send them the product page of the model you like before you order, and if anything is unclear call us first on 02-493-6565.
    Will my worktop take this kind of sink
The short version is that the worktop has to carry the weight of the sink plus the water in it from underneath, because this group is clamped under the stone rather than resting on top of it. Thick stone or engineered stone with a support frame underneath works well. If the worktop is a material that dislikes moisture along a cut edge, laminate over plywood for example, ask the maker to confirm how they seal the cut and carry the load first. The catalogue does not state worktop thickness, the fixing method or the size of the support frame, so leave those to your fabricator or let the MEX team look at the site. If the worktop was never built to carry weight from below, there are 48 more models in the drop-in category.
    Is it hard to clean, do I need to scrub
No scrubbing. A sponge and ordinary washing-up liquid, then wipe it dry after every use. Those pale marks everyone worries about come from letting water dry on the steel, not from the sink itself. Keep steel wool and anything strongly chlorinated or acidic away from it, and do not leave cast iron soaking overnight. The part worth watching is the silicone line between the sink and the underside of the worktop: wipe it dry, keep an eye on whether it is still sound, and call a fitter to redo it when it starts to go. The strainer basket just needs tapping out and rinsing once a day.
    Something went wrong after fitting, who do I call
Call us. MEX has service centres nationwide on 02-493-6565, with people who can help on sizing, the worktop cutout and undermount fitting. Genuine parts are stocked too, including the 3.5 inch waste, the strainer basket and the drain pipe with its P-trap, and you can order replacements straight from a service centre. For the warranty terms on a particular model, ask a service centre or the dealer you bought it from.
  

				
				
				
		
				
				
					


  
  
    
    Measure the cabinet once
MEX takes it from there
    Tell us the cabinet width and the model you like. Our team can help with the cutout and the support frame under the worktop. Service centres nationwide, call 02-493-6565
    
      Shop All Undermount Sinks →
      Open The Catalogue
    
    MEX SWITCH ON THE GOOD TIMES